/*
    SPDX-FileCopyrightText: 2018 Vlad Zahorodnii <vlad.zahorodnii@kde.org>

    SPDX-License-Identifier: GPL-2.0-or-later
*/

#pragma once

#include "kwin_export.h"

#include <QEasingCurve>
#include <QSharedDataPointer>

#include <chrono>

namespace KWin
{

class RenderView;

/**
 * The AnimationClock type provides a convenient to compute animation delta times.
 */
class KWIN_EXPORT AnimationClock
{
public:
    AnimationClock();

    /**
     * Resets the clock to the initial state.
     */
    void reset();

    /**
     * Advances the clock to the specified @a timestamp.
     *
     * The @a refreshRate specifies the expected refresh rate, in milli-Hertz. It can be used to
     * limit the delta time between consecutive frames to minimize stuttering if a frame has missed
     * its target vblank. If the specified refresh rate is @c 0, the delta time is not limited.
     *
     * Returns the number of milliseconds elapsed between this and the last tick().
     */
    std::chrono::milliseconds tick(std::chrono::nanoseconds timestamp, uint refreshRate = 0);
    std::chrono::milliseconds tick(const RenderView *view);

private:
    std::optional<std::chrono::nanoseconds> m_lastTimestamp;
};

/**
 * The TimeLine class is a helper for controlling animations.
 */
class KWIN_EXPORT TimeLine
{
public:
    /**
     * Direction of the timeline.
     *
     * When the direction of the timeline is Forward, the progress
     * value will go from 0.0 to 1.0.
     *
     * When the direction of the timeline is Backward, the progress
     * value will go from 1.0 to 0.0.
     */
    enum Direction {
        Forward,
        Backward,
    };

    /**
     * Constructs a new instance of TimeLine.
     *
     * @param duration Duration of the timeline, in milliseconds
     * @param direction Direction of the timeline
     * @since 5.14
     */
    explicit TimeLine(std::chrono::milliseconds duration = std::chrono::milliseconds(1000),
                      Direction direction = Forward);
    TimeLine(const TimeLine &other);
    ~TimeLine();

    /**
     * Returns the current value of the timeline.
     *
     * @since 5.14
     */
    qreal value() const;

    /**
     * Advances the timeline to the specified @a timestamp.
     *
     * The @a refreshRate specifies the expected refresh rate, in milli-Hertz. It can be used to
     * limit the delta time between consecutive frames to minimize stuttering if a frame has missed
     * its target vblank. If the specified refresh rate is @c 0, the delta time is not limited.
     */
    void advance(std::chrono::nanoseconds timestamp, uint refreshRate = 0);
    void advance(const RenderView *view);

    /**
     * Returns the number of elapsed milliseconds.
     *
     * @see setElapsed
     * @since 5.14
     */
    std::chrono::milliseconds elapsed() const;

    /**
     * Sets the number of elapsed milliseconds.
     *
     * This method overwrites previous value of elapsed milliseconds.
     * If the new value of elapsed milliseconds is greater or equal
     * to duration of the timeline, the timeline will be finished, i.e.
     * proceeding TimeLine::done method calls will return @c true.
     * Please don't use it. Instead, use TimeLine::update.
     *
     * @note The new number of elapsed milliseconds should be a non-negative
     * number, i.e. it should be greater or equal to 0.
     *
     * @param elapsed The new number of elapsed milliseconds
     * @see elapsed
     * @since 5.14
     */
    void setElapsed(std::chrono::milliseconds elapsed);

    /**
     * Returns the duration of the timeline.
     *
     * @returns Duration of the timeline, in milliseconds
     * @see setDuration
     * @since 5.14
     */
    std::chrono::milliseconds duration() const;

    /**
     * Sets the duration of the timeline.
     *
     * In addition to setting new value of duration, the timeline will
     * try to retarget the number of elapsed milliseconds to match
     * as close as possible old progress value. If the new duration
     * is much smaller than old duration, there is a big chance that
     * the timeline will be finished after setting new duration.
     *
     * @note The new duration should be a positive number, i.e. it
     * should be greater or equal to 1.
     *
     * @param duration The new duration of the timeline, in milliseconds
     * @see duration
     * @since 5.14
     */
    void setDuration(std::chrono::milliseconds duration);

    /**
     * Returns the direction of the timeline.
     *
     * @returns Direction of the timeline(TimeLine::Forward or TimeLine::Backward)
     * @see setDirection
     * @see toggleDirection
     * @since 5.14
     */
    Direction direction() const;

    /**
     * Sets the direction of the timeline.
     *
     * @param direction The new direction of the timeline
     * @see direction
     * @see toggleDirection
     * @since 5.14
     */
    void setDirection(Direction direction);

    /**
     * Toggles the direction of the timeline.
     *
     * If the direction of the timeline was TimeLine::Forward, it becomes
     * TimeLine::Backward, and vice verca.
     *
     * @see direction
     * @see setDirection
     * @since 5.14
     */
    void toggleDirection();

    /**
     * Returns the easing curve of the timeline.
     *
     * @see setEasingCurve
     * @since 5.14
     */
    QEasingCurve easingCurve() const;

    /**
     * Sets new easing curve.
     *
     * @param easingCurve An easing curve to be set
     * @see easingCurve
     * @since 5.14
     */
    void setEasingCurve(const QEasingCurve &easingCurve);

    /**
     * Sets new easing curve by providing its type.
     *
     * @param type Type of the easing curve(e.g. QEasingCurve::InCubic, etc)
     * @see easingCurve
     * @since 5.14
     */
    void setEasingCurve(QEasingCurve::Type type);

    /**
     * Returns whether the timeline is currently in progress.
     *
     * @see done
     * @since 5.14
     */
    bool running() const;

    /**
     * Returns whether the timeline is finished.
     *
     * @see reset
     * @since 5.14
     */
    bool done() const;

    /**
     * Resets the timeline to initial state.
     *
     * @since 5.14
     */
    void reset();

    enum class RedirectMode {
        Strict,
        Relaxed,
    };

    /**
     * Returns the redirect mode for the source position.
     *
     * The redirect mode controls behavior of the timeline when its direction is
     * changed at the source position, e.g. what should we do when the timeline
     * initially goes forward and we change its direction to go backward.
     *
     * In the strict mode, the timeline will stop.
     *
     * In the relaxed mode, the timeline will go in the new direction. For example,
     * if the timeline goes forward(from 0 to 1), then with the new direction it
     * will go backward(from 1 to 0).
     *
     * The default is RedirectMode::Relaxed.
     *
     * @see targetRedirectMode
     * @since 5.15
     */
    RedirectMode sourceRedirectMode() const;

    /**
     * Sets the redirect mode for the source position.
     *
     * @param mode The new mode.
     * @since 5.15
     */
    void setSourceRedirectMode(RedirectMode mode);

    /**
     * Returns the redirect mode for the target position.
     *
     * The redirect mode controls behavior of the timeline when its direction is
     * changed at the target position.
     *
     * In the strict mode, subsequent update calls won't have any effect on the
     * current value of the timeline.
     *
     * In the relaxed mode, the timeline will go in the new direction.
     *
     * The default is RedirectMode::Strict.
     *
     * @see sourceRedirectMode
     * @since 5.15
     */
    RedirectMode targetRedirectMode() const;

    /**
     * Sets the redirect mode for the target position.
     *
     * @param mode The new mode.
     * @since 5.15
     */
    void setTargetRedirectMode(RedirectMode mode);

    TimeLine &operator=(const TimeLine &other);

    /**
     * @returns a value between 0 and 1 defining the progress of the timeline
     *
     * @since 5.23
     */
    qreal progress() const;

private:
    class Data;
    QSharedDataPointer<Data> d;
};

} // namespace KWin